Complete Retirement Welding & Metal Fabrication Business Liquidation Auction

 COMPLETE RETIREMENT WELDING & METAL FABRICATION BUSINESS LIQUIDATION AUCTION

FRIDAY, APRIL 15, 2011  10:00AM
OMAHA, NE: 2021 N. 84th Street (Auction held on Premises)

Can’t Make it to the Auction, Bid Live at www.proxibid.com

CLICK HERE FOR ONLINE BIDDING & AUCTION DAY CATALOG

FLATBED PICKUP:
2000 Ford F-350 XL 1-Ton Dually Flatbed Truck, 5.4 Liter V-8 Gas Engine, 20,000 on New Long Block, Automatic Transmission (New in 2010), 128,476 Total Miles, Air Conditioning & Heat, AM/FM, 215 85R16 Radial Tires, Knapheide 8' x 12' Steel Flatbed Body with 42" Sides.

FORKLIFT:
1995 Toyota Model 42-6FGCU18 Forklift, LP Gas Engine, SN# 61745, ROPS, 13,164 Hours, 189" 3-Stage Mast with Hydraulic Side Shift, 3,250 lb. Capacity, Solid Pneumatic Tires, Front 18x6x12 1/8, 4' Forks, Very Nice Condition.

COMMERCIAL PAINT BOOTH:
10’ Wide by 12’ Deep x 7’ High Steel Commercial Paint Booth, (4) Top Mount Fluorescent Lights, Exhaust System & Filters.

TUBING BENDERS:
Hossfeld Manual Tubing Bender on Stand, Various Dies up to 2".
1995 Americor Model “CM2000 Top 2” Electric Tubing Bender, SN# 15695, Dual Foot Controls (Forward & Reverse), 220 Single Phase, 1HP Electric Motor, Up to 2" on Pipe Dies.
Shop Made Hydraulic Tubing Bender on Stand, Hydraulic Ram with Manual Pump, Dies up to 4".

WELDERS:
Miller Bobcat Model 225NT Portable Welder/Generator, SN# LC631890, Kohler 20HP Gas Engine with Electric Start, 210 Actual Hours, Wire Stick Tig & AC Welding Capabilities, Leads & Ground Clamp, Like New.
Millermatic Model 251 Portable Wire Feed Welder on Cart, SN# LE344453, 30ft. Power Cord, Single Phase, 220, Leads, Miller Gun & Tank.
Miller Millermatic 251 Portable Wire Feed Welder on Cart, SN# LC4911504, Single Phase, 220, Leads, Miller Gun & Tank.
Thermal Dynamics Pak Master Model 75XL Portable Air Plasma Cutter, PCH/M-75 Torch, Ground Clamp, Mounted on HD Steel Cart.
Miller Model SuperS-32P Portable Suitcase Type Wire Feed Welder, Miller Gun.
(2) Miller Millermatic 135 Portable Suitcase Type Wire Feed Welders, Both with Leads & Miller Gun, (1) is on Special Made 2-Wheel Cart.
Miller Thunderbolt AC/DC Electric Arc Welder with Leads & Ground Wire.
Miller Model Spoolmatic 30A Air Cooled Spool Gun Attachment for Wire Feed Welders.
Miller Spoolmatic 15A Air Cooled Spool Gun Attachment for Wire Feed Welders.
Complete Acetylene Torch Set with Smith Gauges, Torch & Medium-sized Tanks;

METALWORKING EQUIPMENT:
Ellis Model 1600 Metal Band Saw, 1HP Electric Motor, 1"x10' Blade, Automatic Stop, Manual Clamp, Cut 45 Degrees, Angle Cut Capacity, on 2-Wheel Cart.
Ellis Model 1600 Metal Band Saw, SN# 16041237, 10'x1" Blade, Cut 45 Degree Angle, Clamp, 1-HP Single Phase Motor.
(2) Bateman Inc. Trip Hammer Type Punch & Shear Combination Ironworkers on HD Steel Stand.
Ellis Model 9400 HD Industrial Drill Press, SN# 94D04202, Variable Speed Control, HD Vise, 3/4" Chuck.
Ellis Model 6000 Pedestal Belt Grinder, SN# 60BG3414, 1HP Electric Motor, Single Phase, 5,000SFM Belt Speed.

JIGS & FINISHED PRODUCT INVENTORY:
Several Various Sized Steel Scroll Jigs; (250) Various Cast Iron Ornamental Casting Pieces, Spears, Caps, Pickets, etc; Sheets of Sheet Steel & Various Sized Expanded Metal; Hand Tools: Shovels, Spades, Snow Shovels;

HYDRAULIC IRONWORKER:
2005-2006 Uni-Hydro Inc. Model T40-14 Turret Ironworker Hydraulic Ironworker, 40 Ton Capacity, 6-Head Turret Type Punch Head, Shear, Pipe Knotcher Attachment, Foot Control, SN# T6490X, One Owner, Approx. (50) Dies.

SHOP EQUIPMENT:
Ingersoll-Rand Model T30 Horizontal Air Compressor, 5HP Electric Motor, V-Twin Compressor, 120 Gallon Tank, Single Phase.
Lakewood Model MC42 48" Pedestal Shop Fan with Wheels; Small Welding Work Bench with Lower Shelf on HD Casters; (2) HD Steel Welding Shop Tables on HD Casters; 75lb. Antique Anvil with Steel Stand; (2) HD Roller Top Stands; HD 4-Wheel Steel Cart; HD 4-Wheel Moving Cart with Steel Casters; HD Steel Shop Bench with Lower Shelf with HD Vise; Old Antique Solid Bar Hot Roll Steel Picka Twister; 7' Steel Shop Step Ladder; Snap On 3-Door Bottom Chest Tool Box, 9-Drawer Matching Top Tool Cabinet; HD 2-Wheel Cart on Pneumatic Tires; (3) HD Steel Metal Stands with Rolling Tops; (4) Metal Saw Horses; (2) Pedestal Rolling Stands; General 2-Ton Hydraulic Floor Jack; Steel Shop Step Ladder 8’; 1-Section of Steel Rolling Scaffolding 6’ Wide; (2) Wood Ladders 4’ & 5’; 6-Wheel Poly Creeper; Small Steel Shop Bench with Lower Shelf; Small Steel Stands with Lower Shelves; Subzero Upright Refrigerator Used for Paint Storage; HD Steel Rack with (1) Angled Side, Walk-In Storage on Other Side.

NEW STEEL INVENTORY:
Lots of Misc Short Steel; (13) 20’x3/4”x3/4” Square Tubing; (12) 1 ½”x20’ Steel Tubing; (7) 2”x2”x20’ Steel Tubing; (31) 1”x1”x20’ Steel Tubing; (4) 1 ½”x3/4”x20’ Steel Tubing; (26) ¾”x3/4” Solid ¾ Square Pot Roll Steel; 1” Channel x1/2”x1/8”; (81) ½” Square Pot Roll Steel; (11) 2x1x1/8” Channel; 6” Square Tubing 24’; 6” Square Tubing 15’; 3”x3” Tubing, (1) 24’; (17) 1 ½”Channel 1”x1/8”; (23) 1 ½”Channel ½”x1/8”; 1 5/8” Pipe, (4) 21’; (12) Molded Cap Rail/Tube; (17) 1 ¼”x1/2”x1/8”; ¼”x4” (4) 20’; 8x1/2” Strap, (80); 3’x18’ Floor Grate; 3”x1 Tubing (14) 24’; (5) 2”x1” Square Tubing; 8”x1” Strap (18) Bars; ¼”x1” (20); 1 ½”x1/4” (10); 1 ¼”x1/2”x1/8” Channel (17); 1/8”x1” Angle Iron (8); ½”x1/2” Angle Iron (10); (15) Pieces of Molded Cap Rail.

HAND POWER TOOLS:
(2) Hitachi DH40MR HD Electric Rotary Drill, Reversible; (1) Hilti Electric Rotary Drill, Reversible; Milwaukee HD Electric Hammer Drill with Case, Reversible; Milwaukee 14.4 Volt Cordless Driver Drill, 1 Battery & Case; (2) Milwaukee 18 Volt Cordless Impact Wrench, 1/2:” Drive, Case, (2) Batteries & Charger; Like New Milwaukee Portable Electric Compact Band Saw with Case; Milwaukee Portable Electric Band Saw; Porter Cable Portable Electric Band Saw; Jackson Welding Helmets; (2) Black & Decker HD 9" Angle Grinders; (12) DeWalt & Other HD Electric Angle Grinders; (3) HD Electric Hammer Drills; (1) Jig Saw; (1) Miniature Portable Band Saw; (5) DA’s; (2) HD Electric Impacts; Associated Rapid Chart Portable Battery Charger; Power Air Portable Air Bubble Tank; (6) Air Paint Sprayers.

MISC:
60-65 Gallon of Paint, Enamel; Cans of Spray Paint.

AUCTIONEER’S NOTE: Make your Plans now to Attend this Super Clean Retirement Business Liquidation Auction. Chuck has taken great pride over the years in his Business and in the care of his Equipment. He has made the difficult decision to cease business operations and move in a different direction in his life. All Equipment is in Top Condition and is ready to go to work for you. For further information or photos, please Contact the Auction Company or visit the web site at www.nitzauctions.com. 7% Buyer’s Premium applies. Lunch & Restrooms on Grounds.

MISSION ORNAMENTAL IRON WORKS - SELLERS